OLJEKYLARE Standard Setrab

Setrab kylare STD tillverkas i Sverige och tål 10 bars tryck. Kylaren finns i tre olika varianter och varje variant finns därefter i flera olika höjder (rader)
1-serien Bredd total 210mm cellpaket 163mm, 50mm tjock
6-serien Bredd total 330mm cellpaket 283mm, 50mm tjock
9-serien Bredd total 405mm cellpaket 385mm, 50mm tjock
Tänk på att inte montera kylaren stumt.
Högkvalitiva Setrab oljekylare STD tillverkad i alumium med Nocolok-lödprocess samt lackade med epoxilack för hög korristionsbeständighet. Kylaren tål 10 bar arbetstryck, 200.000 lastväxlingar 1 Hz. STD kylaren passar bäst till motorer, hydralsystem, transmissioner, transformatorer, bränslekylare m m. Kylaren bör monteras så vibrationsfritt som möjligt vilket innebär att kylaren fritt kan utvidga sig av värmen. 
Technical Specifications  
Working Pressure 0-10 bar(g) dynamic
Pressure Pulsation Endurance 200k pulsations, 0-10 bar(g), 2 Hz, 60°C oil temp
Max Pressure  12 bar(g)
Burst Pressure 37 bar(g)
Pressure Test 10 bar(g)
Leak Test 4 bar(g)
Working Temperature -40°C to 150°C
Corrosion Endurance  20 days according to SWAAT G85-94 A3
Inner Cleanliness  ISO 4406 16/14
General Dimensional Tolerances  ISO 2768-v
Material  Aluminium alloys
Max Connection Tightening Torque  40 Nm

Working Pressure
The range in which the cooler is designed to operate (above atmospheric pressure). The word "dynamic" implies that the pressure can fluctuate between the limits.

Pressure Pulsation Endurance
How many times the cooler can withstand pressurizaton between a lower and an upper limit. The Herz number indicates the frequency of pulsations per second.

Max Pressure
The maximum operating pressure.

Burst Pressure
The maximum pressure the cooler can withstand before bursting.

Pressure Test
The pressure the cooler is exposed to after brazing to ensure brazing joint integrity.

Leak test
The pressure level the cooler is tested at for leaks after the pressure test.

Working Temperature
The temperature range the cooler is designed to operate within. Operating temperatures outside of the defined range will negatively affect the strength and durability of the cooler.

Corrosion Endurance
How long the cooler can withstand a salt spray test before starting to leak. The test simulates the expected lifetime exposure of a typical vehicle to a mixture of water and road salts.

Inner Cleanliness
The maximum amount of particles the cooler is expected to contain.

General Dimensional Tolerances
The standard to which the cooler conforms regarding dimensions specified on the technical drawing.

Material
The material the cooler is made of.

Max Connection Tightening Torque
The maximum torque allowed when tightening the connection on the cooler.